Четверг, 24.07.2025, 11:41
RepairPRINT - о ремонте и обслуживании копировальной техники
Главная Регистрация Вход
Приветствую Вас, Гость · RSS
Меню сайта
Категории
Xerox [17]
Canon [25]
HP [8]
OKI [3]
Panasonic [6]
Toshiba [2]
Epson [1]
Статистика
 Статьи
Главная » Статьи » Коды ошибок » Canon
Коды ошибок Canon NP7161

Canon NP7161

Код ошибки Описание
E000
  • The thermistor (TH1, TH2) has poor contact or an open circuit
  • The fixing heater (H1) has an open circuit
  • The thermal switch (TSW1) has turned on
  • The triac is faulty
  • The DC controller PCB is faulty
    • E001
  • The thermistor (TH1, TH2) has a short circuit
  • The triac is faulty
  • The DC controller PCB is faulty
    • E002
    E003    		 The thermistor (TH1, TH2) has poor contact or an open circuit

  • The fixing heater (H1) has an open circuit
  • The thermal switch (TSW1) has turned on
  • The triac is faulty
  • The DC controller PCB is faulty
    • E004
  • The triac has a short circuit
  • The DC controller PCB is faulty
    • E010
  • The main motor (M1) is faulty
  • The DC controller PCB is faulty
    • E013
  • The waste toner feedscrew is locked
  • The waste toner feedscrew lock sensor (PS8) is faulty
  • The DC controller PCB is faulty
    • E030
  • The total copy counter has an open circuit
  • The DC controller PCB is faulty
    • E031
  • The accessories counter has an open circuit
  • The DC controller PCB is faulty
    • (E202) No code indication. Keys are disabled

  • The scanner home position sensor (PS1) is faulty
  • The scanner motor (M2) is faulty
  • The DC controller PCB is faulty
    • E208
  • The mirror home position sensor (PS3) is faulty
  • The mirror motor (M4) is faulty
  • The DC controller PCB is faulty
    • E210
  • The lens home position sensor (PS2) is faulty
  • The lens motor (M3) is faulty
  • The DC controller PCB is faulty
    • E220
  • The lamp regulator PCB is faulty
  • The DC controller PCB is faulty
    • E261
  • The power supply frequency is faulty
  • The power supply PCB is faulty
    • E710
    E711
  • The DC controller PCB is faulty
    • E712
  • The DC controller PCB is faulty
  • The ADF controller PCB is fault
  • The ADF cable is faulty
    • E717
  • The DC controller PCB is faulty
  • The Remote Diagnostic Device II PCB is faulty
    • E800
  • The auto power-off circuit has an open circuit
  • The DC controller PCB is faulty
    • E805
  • The exhaust fan (FM2, FM4) is faulty
  • The DC controller PCB is faulty
    • E821
  • The ozone filter is clogged
  • The cleaner thermistor (TH3) has poor contact or an open circuit
  • The DC controller PCB is faulty
    • Категория: Canon | Добавил: Dunmtr (18.08.2009)
    Просмотров: 2435 | Рейтинг: 0.0/0
    Всего комментариев: 0
    Добавлять комментарии могут только зарегистрированные пользователи.
    [ Регистрация | Вход ]
    RepairPrint © 2025
    Поиск