Коды ошибок Panasonic 7722, 7728, 7735
| Код ошибки |
Описание |
| E1-01 |
Scan home problem |
| E1-21 |
Half speed scan home sensor problem |
| E1-22 |
5th & 6th mirror unit sensor problem |
| E1-23 |
Original registration input problem (ADF related?) |
| E1-32 |
No density detection of auto original |
| E1-40 |
Optics fan A not working |
| E1-41 |
Optics fan B not working |
| E2-20 |
Bypass feed sensor |
| E3-03 |
Toner density sensor |
| E3-10 |
High voltage problem |
| E3-20 |
Drive problem |
| E3-22 |
blanking prevention film problem |
| E3-29 |
Discharge lamp problem |
| E4-01 |
Low fuser temperature |
| E4-10 |
Fuser fan problem |
| E5-01 |
24 volt problem |
| E5-04 |
10 volt problem |
| E5-35 |
EEPROM problem |
| J00 |
Bypass feed jam |
| J01 |
Cassette feed jam |
| J02 |
Paper feed unit jam |
| J06 |
Paper feed unit jam |
| J07 |
Bypass feed jam |
| J08 |
Bypass feed jam |
| J16 |
Paper feed unit jam |
| J19 |
Bypass feed jam |
| J20 |
Paper feed jam |
| J21 |
Paper jam in registration area |
| J30 |
Paper jam in center of machine |
| J40 |
Fuser exit jam |
| J41 |
Fuser exit jam |
| J70 |
ADF jam |
| o |
In power save mode. Press any key |
| O |
In standby mode. Press any key |
| P-- |
Add paper |
| U10 |
Document feeder interlock |
| U13 |
Add toner. Could also be toner density sensor, toner feed system, or main board. |
| U16 |
Developer unit not installed properly, or connector problem |
| U17 |
Check sorter |
| U18 |
Dept. maximum copies. This means that a department that has a copy limit has gone over it. |
| U6 |
Paper feed console interlock |
| 
